I can not allocate all the disk space for devices

[andrelhj]

Dear, In FortiAnalyzer I have 100 GB to store logs, however, can not allocate any space. Follow the pictures below. The devices are using total 55,596 GB. In the interface I only have 5,578 GB available, where I should have at least 44 GB. --------------------------------------------------- # get system performance CPU: Used: 4.9% Used(Excluded NICE): 1.9% CPU_num: 1. CPU[0] usage: 5% Memory: Total: 4,136,340 KB Used: 934,800 KB 22.6% Hard Disk: Total: 82,565,808 KB Used: 53,600,436 KB 64.9% Flash Disk: Total: 47,595 KB Used: 34,587 KB 72.7% --------------------------------------------------- # get system status Platform Type : FAZVM64 Platform Full Name : FortiAnalyzer-VM64 Version : v5.0.6-build0310 140205 (GA) Serial Number : BIOS version : 04000002 Hostname : Max Number of Admin Domains : 10000 Admin Domain Configuration : Disabled FIPS Mode : Disabled Branch Point : 310 Release Version Information : GA Current Time : Tue Jul 22 12:03:46 BRT 2014 Daylight Time Saving : Yes Time Zone : (GMT-3:00) Brasilia. 64-bit Applications : No Disk Usage : Free 27.62GB, Total 78.74GB License Status : Valid --------------------------------------------------- # execute lvm info disk01 In use 100.0(GB) disk02 Not present disk03 Not present disk04 Not present disk05 Not present disk06 Not present disk07 Not present disk08 Not present disk09 Not present disk10 Not present disk11 Not present disk12 Not present ---------------------------------------------------

[stukat]

Did you increase the size to 100GB? If it wasn' t initially config' d with this value then I think you' re going to need to extend the LVM to a 2nd drive

[andrelhj]

Originally disk1 was created with 80 GB and was increased to 100GB. I will try to add another LVM on disk2 and see the FortiAnalyzer be recognized.

[Delta]

Did you reset the VM after you extended it?

[andrelhj]

Yes I rebooted the VM however not allocated space.

[andrelhj]

I added a new 20GB disk, to distribute the space for the devices. This article helped me to add and put into use the new disk: http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD34953&sliceId=1&docTypeID=DT_KCARTICLE_1_1&dialogID=62404661&stateId=0%200%2062402990 Thanks for the time and help you. kind regards,