Hub Not Populating in SDWAN Overlay Template

[blezzzo]

Hello, I am trying to create an SD-WAN Overlay template but hub field keeps showing None when I try to populate it. Please any ideas on what could be causing this? 

I'm running  FortiGate 7.6.4 and  v7.6.4  for the FortiManager. 

Please has anyone encountered this before or any ideas on what to do   Thank You

[funkylicious]

hi,

is the device that will be the Hub added to FMG and not part of the Spokes group, but Hub group ?

[blezzzo]

Two separate groups. 

I have the Hub device in the Hub group and Spokes in a separate Spoke Group. 

[funkylicious]

on that hub device, do you have a SDWAN configuration or have you assigned/installed a SD-WAN template which does it ?

[blezzzo]

Yes. I have have an SDWAN template assigned to all three for Direct Internet Access. 

[funkylicious]

https://docs.fortinet.com/document/fortimanager/7.6.3/administration-guide/512599/sd-wan-devices have a look at this

[blezzzo]

Thank you for following up on this. 

I did come across that article. That is what I got for mine. Could not find the "Enable SDWAN Field" like the other pics I see online. 

[blezzzo]

Pic

[funkylicious]

just click it (not right click) and in the menu/toolbar next to it that appears, there should be a More button