Hello guys. Im trying to show vlan config with defined which port is access and which port is tagged. Thank you for answer.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
If it is a standalone switch, the command "show switch interface" should help.
FortiSwitches don't have a command, unlike other major switches, to show tagged and untagged vlan list in a table. The closest is "diag switch vlan list" but it doesn't separate between tagged and untagged. So, only place you can see is your config under "switch interface" as @AEK said. Not the outcome of the config in operation.
Sxxxxxxxxx # diag switch vlan list
VlanId Ports
______ ___________________________________________________
1 port1 port2 port3 port4 port7 port8 port9 port10 port11
port12 port13 port14 port15 port16 port17 port18 port19
port20 port21 port22 port24 port25 port26 port27 port28
internal
2 port1 port2 port3 port4 port5 port6 port24 port26
port27 port28
3 port24 port26 port27 port28
10 port23
100 port22
Toshi
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.