How to force traffic from a device over a specific WAN

OptimalPyme · ‎02-06-2023

Hi to everyone,

I have a firewall model FortiGate 60G with firmware 6.4.6.

I have configured the output to the Internet through 3 lines from 3 different providers, with 3 WAN interfaces configured in the FortiGate.

I need to do some connectivity tests from a specific computer only through one of the WAN's. What do I have to do in the FortiGate configuration so that this specific device will go out through this specific WAN?

funkylicious · ‎02-06-2023

Hi,

You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference

---------------------------
geek
---------------------------

View solution in original post

funkylicious · ‎02-06-2023

Hi,

You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference

---------------------------
geek
---------------------------

OptimalPyme · ‎02-07-2023

Thank you very much funkylicious,

I finally managed to solve it using PBR.

How to force traffic from a device over a specific WAN

Nominate a Forum Post for Knowledge Article Creation