- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How to force traffic from a device over a specific WAN
Hi to everyone,
I have a firewall model FortiGate 60G with firmware 6.4.6.
I have configured the output to the Internet through 3 lines from 3 different providers, with 3 WAN interfaces configured in the FortiGate.
I need to do some connectivity tests from a specific computer only through one of the WAN's. What do I have to do in the FortiGate configuration so that this specific device will go out through this specific WAN?
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you very much funkylicious,
I finally managed to solve it using PBR.