Hi to everyone,
I have a firewall model FortiGate 60G with firmware 6.4.6.
I have configured the output to the Internet through 3 lines from 3 different providers, with 3 WAN interfaces configured in the FortiGate.
I need to do some connectivity tests from a specific computer only through one of the WAN's. What do I have to do in the FortiGate configuration so that this specific device will go out through this specific WAN?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference
Hi,
You could to either policy route ( PBR ) or create a sdwan zone w/ all 3 interfaces ( they will have to not be used in rules ) and a sdwan rule w/ interface preference
Thank you very much funkylicious,
I finally managed to solve it using PBR.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1516 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.