Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jomof
New Contributor II

How to create a Vlan and assigned two interface.

Hello Expert,  

One cisco I am able to create vlan and assign respective port to vlan 

 

example 

------------------

 

interface Vlan31
description Switchware Vlan
ip address 10.118.133 .33 255.255.255.240

 

interface GigabitEthernet3
description CCTV Interface
switchport access vlan 31
no ip address
!
interface GigabitEthernet4
no ip address
shutdown
!
interface GigabitEthernet5
switchport access vlan 31
no ip address

 

On the fortigate  i would like to able to create a similar vlan and assigned different interfaces unsure how to do this.

thank you 

Regards

1 Solution
Toshi_Esumi
Esteemed Contributor III

No, you can't with FGTs. FGTs don't have the SVI & switching feature unlike those router-switch like Cisco, Juniper, etc..

Only thing you can do is to move VLAN switching to your switch by passing all VLANs and non-tagged traffic from the FGT to the switch. On the FGT side, you can stack all VLANs on one parent interface, which carris non-tagged traffic.

 

Toshi

View solution in original post

2 REPLIES 2
Toshi_Esumi
Esteemed Contributor III

No, you can't with FGTs. FGTs don't have the SVI & switching feature unlike those router-switch like Cisco, Juniper, etc..

Only thing you can do is to move VLAN switching to your switch by passing all VLANs and non-tagged traffic from the FGT to the switch. On the FGT side, you can stack all VLANs on one parent interface, which carris non-tagged traffic.

 

Toshi

jomof
New Contributor II

Hello Toshi,

 

Thanks for the clarification.

 

Regards

Labels
Top Kudoed Authors