How to connect SSLVPN to S2S VPN

[Linkem]

Hello,

      I'm a newbie,and I need assistance to connect an user with a SSLVPN to both sides of a S2S VPN.

So far I configured the S2S VPN, and it's working fine, I've configured the SSLVPN and I'm able to connect to the servers on the LAN side of the Main site, but I cannot reach anything on the Remote Site.

Main Site:

FG100D, Firmware v5.4.4,build1117

LAN: 192.168.51.1/24

File server: 192.168.51.10

SSLVPN Tunnel mode, no split tunnel

Policy to accesso LAN

Remote Site:

FG100D, Firmware v5.4.4,build1117

LAN: 192.168.15.1/24

Terminal Server: 192.168.15.60

What should I do to allow the SSLVPN user connected to the Main site to reach and use the Terminal server?

Thank you.

[Toshi_Esumi]

If no split tunnel, the issue is likely the remote site doesn't know how to get back to the SSL VPN client user. You need to have a route, policy, and a phase2 network (if not 0/0<-0/0) at proper places.