How to configure split tunnel in Options "Mode Config"

[Chandrasekhar1]

Hi All,

I am new to Forticlient VPN GUI, there is no option for users to configure split Tunnel details when user select's Options as "Mode config".

The Same is available for the "Manual Set/ DHCP Over IPSec.

Please let me know how to configure the same.

Once again thanks for your support.

Best regards,

Chandra.

[johnathan]

Split tunnel is configured on the FortiGate side of things, not on the FortiClient.
See this article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Enable-split-tunnel-For-IPsec-VPN/ta-p/192...

[Chandrasekhar1]

Hi Johnathan,

Thanks for your quick reply,

For only the Option as "Mode Config", the client get Split Tunnel data(Which Subnets that need to be routed via Tunnel) form FortiGate.

On other case "Manul Set/ DHCP Over IPSec", the end client need to configure on their GUI's

Can you please clarify.

[arahman]

Hi, yes, you are correct, in Mode config the FortiGate sends the split tunnel subnet and in manual you have to configure the subnet in Forti client.