Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Ronildo
New Contributor

How to configure fortiwifi with WLAN internal?

Hello, I need to configure Fortiwifi 50B unit v4.0 mr3 patch 14, in every installation guide, and tips, or kbs fortinet says to enable local wifi radio, but this options not show on wifi controller dashboard, how i figured out this? how i make to show local wifi radio? Thx
1 REPLY 1
Dave_Hall
Honored Contributor

I believe the default config (factory defaults) for any wifi fgt device on 4.0 MR3 is to have the local wifi enabled and maybe have the local wifi vdom set to root. If the fgt went through a firmware upgrade from <4.0 MR3 to 4.0 MR3 then the local wifi features have have been " disabled" . (Follow the firmware upgrade procedure regarding restoring those wifi options.)
 config system global
     set wireless-mode ac
 end
 config wireless-controller global
     set local-radio-vdom " root" 
 set
 
You would able the local wifi as shown in the attached screenshot.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Labels
Top Kudoed Authors