Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
BusinessUser
Contributor

How to configure 2 ip on for site to site vpn remote gateway

As above. The remote site VPN GW has 2 ip addresses. SO how do I configure it? 

1 Solution
pginete
Staff
Staff

You may use ikev2 with network overlay enabled and different network IDs to meet your requirement. Follow this KB https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-establish-more-than-one-IPsec-tunne... as a guide.

Thanks,
Paulo Ginete

View solution in original post

4 REPLIES 4
hbac
Staff
Staff

Hi @BusinessUser,

 

I don't think it is possible to configure 2 IP addresses for remote-gw in the same tunnel. 

 

Regards, 

Nebula1
New Contributor

Hi,

Firstly, what for you will use 2 remote gw?

BusinessUser

for redundancy like 8.8.8.8 and 8.8.4.4

pginete
Staff
Staff

You may use ikev2 with network overlay enabled and different network IDs to meet your requirement. Follow this KB https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-establish-more-than-one-IPsec-tunne... as a guide.

Thanks,
Paulo Ginete
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors