Hi,
I have a two-tier MCLAG-topology with 2x1048E switches in tier 1 and several MCLAG Peer Groups in tier 2. The switches are managed by Fortigates in HA-setup. Now I want to connect multi-homed servers to the tier1-switches and I have created trunk interfaces with MCLAG and active-active LACP via the switch-controller on the Fortigate. The member ports are defined with 1 port from each switch in the MCLAG. What is the recommended way to assign VLANs to the trunk-interface? Should I assign the VLANs via the Trunk-tab or directly to the member-ports in the Interface-tab? With both methods work?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Assign the VLANs to the Trunk on the Trunk-tab
Thank you for your quick answer!
Br,
Thor-Egil
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.