How to allow end vpn user to access via Site to site zone traffic?
I tried create any policy and not worked me.
between the s2s all work fine
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
What I have understood from your post, the question is: You want to access something behind the Site to Site tunnel and you want the SSL vpn users to access it. If my understanding is right, kindly find the answers below.
You will need to create a policy in Branch A where the SSL VPN users connect.
Policy: Incoming interface: SSL TUNNEL & Outgoing Interface: Site to Site Tunnel
Also, you need to add the SSL VPN subnet in the Site to Site VPN phase 2 on both the end.
Note: If you have Split Tunnel enabled, kindly add the destination subnet in the Routing Address in SSL VPN settings.
If my answers are wrong, correct me!
Thanks.
Thank you so much! It's very helpful!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1710 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.