How to activate port 80 in FortEMS to create a certificate with letsencrypt ?

[technocite]

I am migrating a Forticlient EMS on a new server (2019)

On the install, it seems that the IIS was running, so The EMS couldn't use it.

It's now using only 443 with https.

I have disables iis, but how can i turn on the 80 port in my current install of EMS to use letsencrypt ?

Thank you.

[hbac]

Hi @technocite,

Please refer to the admin guide: https://docs.fortinet.com/document/forticlient/7.2.4/ems-administration-guide/917193/adding-an-ssl-c...

Regards, 

[technocite]

Hello,

Thanks for the reply but i've alredy tryied it, but letsencrypt needs port 80 that isn't active on my EMS, that's my problem.

And i don't find out how to activate it

[ozkanaltas]

Hello @technocite ,

In my opinion, if you configure this area with port 80 EMS listens to this port. 

System Settings -> EMS Settings

Before making this change, my advice is to take snapshots from this machine in case things go bad.

[CatInHat · Accepted solution]

To enable port 80 for your current EMS installation and use Let's Encrypt, you will need to configure your EMS application to listen on port 80. This may require changing your web server settings or the configuration of the EMS application itself. Check the EMS documentation or contact support for instructions on setting up listening on port 80 and configuring Let's Encrypt.