How to Renew License for FortiGate and FortiSwitch

[Liza1]

Hello,

I have a request regarding license renewal.
I’ve received two new Contract Registration Codes for renewing licenses — one for a FortiGate and one for a FortiSwitch device.

These devices were already licensed previously, and now I need to renew them.
As I understand it, for FortiGate, the process is:

System → FortiGuard → Enter Registration Code

Is that correct?

As for the FortiSwitch, it is managed through the FortiGate.
How should I apply the license in this case?
Do I need to register it separately, or is it handled via the FortiGate interface?

I would appreciate your guidance on the correct steps.

Thank you in advance!

[atakannatak · Accepted solution]

Hi @Liza1 ,

To do that via classic method:

• Log in to support.fortinet.com and navigate to Assets → Register/Renew.

• Paste the registration code, choose Renew, select the FortiGate and FortiSwitch serial number, accept the terms, and finish.   

https://community.fortinet.com/tpykb84852/attachments/tpykb84852/TKB36/26/95/2.03%20Add%20or%20renew...

• On the firewall, click Refresh License or run execute update-now. Propagation usually completes within 30 minutes (up to 24 hours on busy days). After FortiGuard synchronizes, the FortiGate automatically updates the licence-expiry dates.

If the firewall has no Internet access, download the entitlement file from the portal and upload it by following these below links.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-update-the-license-for-FortiGate-in...

https://docs.fortinet.com/document/fortiswitch/7.2.8/administration-guide/890034/licenses

PS: A FortiSwitch registration code cannot be entered in the FortiGate GUI.

BR.

If my answer provided a solution for you, please mark the reply as solved it so that others can get it easily while searching for similar scenarios.

CCIE #68781