How do I know if this image refers to a ADOM mode normal or workflow mode?

[lincoln29]

How do I know if this image refers to a ADOM mode normal or workflow mode?

[dingjerry_FTNT]

Hi @lincoln29 ,

I am not sure what your FMG version is.  My FMG is running 7.4.2.  In FMG GUI, switch to System Settings --> Advanced, then you can check the ADOM mode and Workspace mode settings there.  See screenshot.

[lincoln29]

I thought that in this image it would be possible to know if the FMG 7.4 is configured as a WF or WS.

[dingjerry_FTNT]

There is a Save button on the top-right corner of the picture. So it can only confirm your FMG has either WF or WS, but not sure which one.

[dingjerry_FTNT]

And it's better to use "Picture" or "Screenshot" instead of "image", I was thinking you were talking about "firmware image".

[lincoln29]

Sorry. Ok. 

[dingjerry_FTNT]

If my reply helped you, please mark it as a solution.

[lincoln29]

I'm reading the FMG 7.4 study guide to understand if I can tell from Screenshot whether it's a WS or WF.

[Martinjoe]

but actually m FMG is running 7.4.2. In FMG GUI, switch to System Settings --> Advanced, then you can check the ADOM mode and Workspace mode settings there.

BTW if you need backend and design flow similar to blessly.com, you must consider a professional & expert

[mrafat]

This is Workspace mode and here is why :
1. In the image you have shared, it shows one of the policy package locked which is an option to be enabled in workspace mode 

2. Second, In workflow there is a bottom to create the session through which you will do any changes so that someone can approve this change , and this bottom doesn't exist in your screenshot
please check below how it looks in workflow