Hello and sorry for my english,
I want to activate revision on my fortigate 901G. I saw this article : https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-the-Revision-option-to-revert-to-a-p...
But the commands doesn't works on my fortigate and i find anything in the GUI about this...
How to activate revision ? i 'd like to have backup when configuration is change et come back easily in last configuration with revision.
thansk a lot
Solved! Go to Solution.
Hi,
According to https://docs.fortinet.com/document/fortigate/7.2.10/cli-reference/339914554/config-system-global the command should be there to activate it,
config system global
set revision-backup-on-logout [enable|disable]
set revision-image-auto-backup [enable|disable]
end
Can you try to execute those commands with enable as they are presented above and maybe show us what error you get?
Also, if you are using multi-VDOM you would need first to enter global config with, config global then execute them.
Hi,
According to https://docs.fortinet.com/document/fortigate/7.2.10/cli-reference/339914554/config-system-global the command should be there to activate it,
config system global
set revision-backup-on-logout [enable|disable]
set revision-image-auto-backup [enable|disable]
end
Can you try to execute those commands with enable as they are presented above and maybe show us what error you get?
Also, if you are using multi-VDOM you would need first to enter global config with, config global then execute them.
User | Count |
---|---|
2624 | |
1390 | |
804 | |
667 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.