Historical FortiView not enabled after FortiAnalyzer Update from 7.4.3 to 7.6.0

[STWHO]

Hi everyone,

after updating our FortiAnalyzer from 7.4.3 to 7.6.0 i noticed that our FortiGates 400F stopped displaying the Summary Tab under Log&Report.

The FortiGate is still on 7.4.3

Has anyone else noticed this behavior?

[AnthonyH]

Hello STWHO ,

Could you please refer to this article and share if this historical fortiview is enabled under the Log Settings?

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-System-Event-Summary-is-disabled/ta-...

[Jirka1]

Hello,
same problem here.
2x 200F in HA, 7.4.5
after update FAZ from 7.4.4 to 7.4.5 summary tab is inactive.

Jirka

[STWHO]

Hi Anthony,

i have seen the article before. Sadly those options are not availible in our FortiGate since its a device without a local disk and all logs are forwarded to the Analyzer.

Best Regards

Alex

[JoWi]

Hi STHWO,
i have the same issue after updating FortiAnalyzer to 7.6.0.
Did you managed to solve the Problem?

[STWHO]

Hi JoWi,

sadly not.

I am currently running FortiGate 7.4.5 with FortiAnalyzer 7.6.0.

I am at a networking event next week and want to ask a few other Forti Customers and our Systems Engineer if they already run 7.6.0 and face the same problems.