We have developed who uses a lot of bandwidth, so we need to move his traffic to the other WAN (wan1) which is our backup ISP.
how can we move the Higher bandwidth usage user to WAN1?
We are using Fortigate 60F with firmaware v7.2.4 .
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
You may consider to configure SD-WAN rule for particular user/group.
That I can get, (192.168.3.101)
Hi AMAK,
In the fortiview you can check the Fortiview sources(Top traffic sessions aggregated by source) from where you can get an idea which user is utilizing more bandwidth.
Then you need to send that user traffic through the required interface. If you route with IP, if its a static IP then fine, if it is dynamic then the routing will not be appropriate as it keeps changing. Hence, you can configure it with the user instead.
Regards,
Vimala
I can get the user from he Fortiview sources, but cannot make a policy for that.
Do I need to make a policy or have to configure through the traffic shaping?
Hi AMAK,
You need to have a sdwan rule configured for that specific user traffic to go through the required interface.
Regards,
Vimala
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1712 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.