Higher bandwidth usage user move to different wan

[AMAK]

We have developed who uses a lot of bandwidth, so we need to move his traffic to the other WAN (wan1) which is our backup ISP.

how can we move the  Higher bandwidth usage user to WAN1?

We are using Fortigate 60F with firmaware v7.2.4 .

[abarushka]

Hello,

You may consider to configure SD-WAN rule for particular user/group.

[AMAK]

That I can get, (192.168.3.101)

[kvimaladevi]

Hi AMAK,

In the fortiview you can check the Fortiview sources(Top traffic sessions aggregated by source) from where you can get an idea which user is utilizing more bandwidth. 

Then you need to send that user traffic through the required interface. If you route with IP, if its a static IP then fine, if it is dynamic then the routing will not be appropriate as it keeps changing. Hence, you can configure it with the user instead.

Regards,

Vimala

[AMAK]

I can get the user from he Fortiview sources, but cannot make a policy for that.

Do I need to make a policy or have to configure through the traffic shaping?

[kvimaladevi]

Hi AMAK,

You need to have a sdwan rule configured for that specific user traffic to go through the required interface.

Regards,

Vimala

[HiralShah]

Hello Amak,

I believe 192.168.3.101 is taking higher bandwidth for you so as suggested you can create sd-wan rule and in interface preference, you can keep only wan1 as you want traffic from 192.168.3.101 go through wan1 only.