Hide 'upgrade' message when logging in to Managed FG??

Jakob-AHHG · ‎03-13-2023

Hi All,

Yes I know, 'use the Manager'.. but some things are just not possible from Manager, so we need to login to the FortiGates & Switches directly.

Why does the FG prompt the user loggin in, to do a FW upgrade, when the FG is Managed, and we even have Firmware Templates defined, that clearly state, it should NOT be upgraded!

It would be great, if this prompt could be hidden...

Jakob Peterhänsel,
IT System Admin,
Arp-Hansen Hotrel Group A/S, Copenhagen, DK

vsahu · ‎03-13-2023

Hello Jakob-AHHG,

You can disable the warning use below command

config system global
set gui-firmware-upgrade-warning disable

end

https://docs.fortinet.com/document/fortigate/7.2.4/administration-guide/475378/firmware-upgrade-noti...

Regards,
Vishal

View solution in original post

vsahu · ‎03-13-2023

Hello Jakob-AHHG,

You can disable the warning use below command

config system global
set gui-firmware-upgrade-warning disable

end

https://docs.fortinet.com/document/fortigate/7.2.4/administration-guide/475378/firmware-upgrade-noti...

Regards,
Vishal

Jakob-AHHG · ‎03-14-2023

How NICE!

Then, that should simply be the Default setting, when a FG/FSW is managed by FGM.. ;)

Jakob Peterhänsel,
IT System Admin,
Arp-Hansen Hotrel Group A/S, Copenhagen, DK

Hide 'upgrade' message when logging in to Managed FG??

Nominate a Forum Post for Knowledge Article Creation

You are leaving our website