Help with Fortigate 30E Dual WAN Setup

[cibaa]

I'm trying to configure my Fortigate 30E to use dual WAN ports. I've set up LAN1 as a WAN port with the role changed to WAN and DHCP enabled, which it gets from the Starlink router. My primary link is from my ISP.

The problem is, whenever I plug in the secondary Starlink WAN port, the internet drops entirely. I've already configured the policies and static route, but I can't figure out why it's behaving like this.

Any ideas or suggestions https://omegle.onl/ ? Thanks in advance!

[AEK]

You better use SD-WAN.

You can start here:

https://docs.fortinet.com/document/fortigate/7.2.10/administration-guide/889544/sd-wan-quick-start

[hokilvo1]

I am in the process of setting of 2 site-to-site tunnels across separate WAN links to provide failover in an active/passive. My SE told me it cold be done active/active using Policy Routes in addition to SD WAN rules. Do you mind sharing what you have accomplished so far? I am researching this on my end but do not understand Policy Routes enough just yet.