Having none Fortinet switches in Managed Fortiswitch Topology

[AliB84]

Hi Everyone, 

Is there any way that we can see the non-Forti switches in Managed Fortiswitches? Either in between the switches or on the edge of the network. 

Thanks

[ekrishnan]

Hello,

Managed Switches which is shown on the FGT is only for Fortiswitches and non-fortinet switches will not be shown here. However you can use the Device inventory to see if other switches are detected but again you cannot manage or monitor it like you do for FSW or FAPs.

Regards

Elangkajan K