Having issues with APs suddenly becoming slow and almost unresponsive

rbn · ‎05-29-2015

I have been fighting this for so long, I dont know what to do.

I have several sites running FGT and FAPs. Yesterday I made the desition to TFTP new firmware on all the FAPs and FGTs to see if a clean start can fix the problem. The thing is. The setup can work fine, and then all the sudden the speed is terrible. I go inside the FGT and check SNR and stuff like that and everything looks great, but it is not. Once this client had this problem and I tried to change a setting in the AP profile, and after that, poof everything was fine again.

Another client reboots the FAP when it is to slow and all the sudden everything is fine again. So it does seem to be something with the APs. But a user should have to do that.

Has anyone heard of these kind of problems. I have had so many clients having problems with the FAPs, I am att crossroad where I am seriously thinking about exchanging those and never look back. But that would be very expensive.

I spoke to some other IT guy and many of them say FAPs are ****. But I am really wondering. Is it that bad. What do you guys here on the forum think. Do you have setups with FAPs that are working great. How do you setup the FAPs.

For one thing, I noticed when I only run 5GHz on a SSID the handoff from AP to AP does not work. But if I turn on 2,4GHz it works. That seems weird. I also tried setting up different AP profiles for different APs in the same office so that I can choose band and stuff like that. As soon as I do that the users complain about lots of issues. So for now I am running everything very "auto" which I think is weird that I need to do with expensive APs like this.

Please do help out. Even if it is telling me, stay away from FAPs. But if you have a working setup with at least 3 or more APs, how does your AP profile look and things like that.

Thanks, I really hope we can solve this, or I will have a lot of APs to exchange... that will be a big hit for my company, Something I dont think I deserve since I am just trusting my distributor and selling a brand I that thought did proper products.

PS. All my clients are Mac users if that helps in some way.

eyexmeetsxeye · ‎10-28-2015

I have been working with FortiAP's and Fortigates for the past 2.5 years. It has been trying to say the least. I have over 100 of the 222B line (outdoor models), paired with 100D, 140D, 80CM, and 90D's.

Before 5.0 build 86, completely broken. Daily/nightly resets to try to get people working. Build 86, mostly stable with weird quirks, usually reset about every week or two. After build 86 (the newest build 98), I reverted back to 86 based on TACs recommendation because everything ground to a halt no matter how many soft resets we did. I wouldn't touch the 5.2.X line with a 10 foot pole (I will maybe try it around 5.2.8 or so).

The problem is there are some things that work absolutely great and other things that completely break the platform.

Resource provisioning - Does not work. I love seeing all 10 of my APs on site boot up and stay on Channel 1

Mesh Backhaul - Works great over 5ghz

AP Quality - Is hit or miss. Some units will drop and need to be powercycled. One month with zero resets and the next month 5 resets. I have begun to doubt their manufacturing source.

Multiple SSIDs - Despite what they say, putting on more than a few will cause you a lot of problems

Signal strength - Great

Single SSID Handoff between APs - Usually pretty good. I have watched a tech walk around and literally jump to different APs as he walked. The only problems you get here is the actual device itself refusing to switch

Working with Controllers - CAPWAP usually works pretty spot on. I do like the ease of pairing it with units, although my main gripe is that a WIFI unit has to use a tunnel SSID versus most of your actual AP's will benefit from bridge mode

Captive Portal with 3rd party radius- Only works with 5.2.X line on Fortigate - See above about firmware

We haven't given up yet, but hope for one day a good firmware without horrible broken bugs in it. I would like to setup a hospitality site without having to worry. After reading this forum I will be trying a couple tweaks but mainly waiting for Fortinet to put some time and effort into their firmware.

View solution in original post

mike_dp · ‎06-08-2016

We have 4 sites with at least 2 FAPs each and our main office has 7 FAPs for 4 different floors. We run everything on OS 5.4 from FGTs to FAPs and never got a complaint about speed. It is slower a bit on 2.4GHz though. We have all channel picked up manualy so there's minimum interference. And tx power is at 100% for each AP.

We had stand alone AP with DD-WRT in the past and had trouble with it and now with FAPs it works like a charm (at least for now).

Fortigate : 80E, 80F, 100E, 200F, 300E : 6.4.6

FortiAnalyzer, ForticlientEMS

Having issues with APs suddenly becoming slow and almost unresponsive

Nominate a Forum Post for Knowledge Article Creation