Has anyone successfully installed 7.4.7 on 1048E Fortiswitches?

[k1riby]

I only have 1 non-prod switch I can use, and I upgraded from 7.2.0(?) to 7.4.7

After upgrade, web GUI just showed Server Error 500, although I could still ssh into the switch.

After switching boot to the secondary partition (still on 7.2.0) I was able to get back into GUI. I then upgraded incrementally, and all versions worked until 7.4.6. Trying to upgrade from 7.4.6 to 7.4.7 again gave me Server Error at the GUI.

Is anyone successfully using 7.4.7 on 1048E platform?

[Anthony_E]

Hello,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello,

We are still looking for someone to help you.

We will come back to you ASAP.

Thanks,

[rosatechnocrat]

Verify there are no crashlogs reported. 

Looks like there might be a known issue with FortiGate. You might need to contact the Fortinet TAC Support with the tac report of the switch. 

[abelio]

Hello
same issue , but with FSW 124E standalone
Solved after upgrade to 7.6 (7.6.2 in my case)

hope it helps