Good morning
I have a little problem. I have created Virtual IPs.
I don't know if these ports are good or not, the server Qnap runs on external IP or ports 8081 and 443 login is via www with secured ssl.
I created an ipv4 policy HaiPin_qnap
Incoming - internal
Outgoing - internal
source - all
destination - all
service - all
Nat - disabled
Internal1_2 is first ISP
Internal2_2 is second ISP
At the end of the configuration it is shown on the internet: https://video.fortinet.com/products/fortigate/5.4/fortigate-hair-pinning-5-4
that the policy ID 2 is being edited
But it will be different for me, I don't know what policy ID to edit.
And I have one more question. I have over 20 virtual Ips, will it not collide with this edition of the firewall, or something will break ...
Employees complain to me that they cannot connect via ext. LAN network to external qnap server IP so I wanted to do it and I am a beginner Fortigate 60E pls help...
Best Regards
SW
