We have 2 forti 60E devices, one is FGT and one is FWF (fortiwifi), we built an active passive cluster with these devices, and we know that everything works (we did a failover test and all the traffic went to the other device and continued to work)
we still have 2 problems that we are trying to solve
- the cluster never shows us synchronized on both devices,
- we have several interfaces that are connected to the master but not connected to the slave (because they are not relevant to the fall and we have no way to connect them) so we need to bypass their synchronization
Any ideas are welcome
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
I am surprised that you were even able to create cluster. If you cluster 2 devices together that are different platforms - FGT and FWF, they will not synchronize. Just because FWF has some config parts that FGT is not able to use.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1697 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.