HA - one port failure in 802.3ad aggregate

[lindblom]

Hi! Let' s say that I have a set up like this: Fortigate 600C prio 200 <---4x cat6---> Switch-1 Fortigate 600C prio 100 <---4x cat6---> Switch-2 Is it possible to configure, that if less than N number of ports are active in an aggregate, the aggregate is shut down / another HA member becomes the primary unit? /Stefan

[emnoc]

Yes you can do a min-link active on most modern switches, doubt you can do that feature in on the FGT side tho.