Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MustphaBassim
New Contributor III

HA issue

Hello Dears

 

I have two firepower devices (HA active/standby) connected to two fortigate firewalls (HA active/standby) when both of the fortigate firewalls are working the HA status become faild while when i stop one of the fortigate devices the HA status become fine anyone have idea about this issue ? take in mind the connection is :

 

FG1-Port3<-->FP1-Port3

FG1-Port4<-->FP2-port4

FG2-Port3<-->FP1-Port4

FG2-Port4<-->FP2-Port3

1 REPLY 1
Toshi_Esumi
SuperUser
SuperUser

That generally wouldn't work for both sides. Cisco doc below indicates FTD's HA seems to work quite similar to FGT's HA. You need to have at least one switch inbetween so that FG1/FG2 port3s and FP1/FP2 port3s are on the same broadcast domain, and same goes with port4s.

 

https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config-guide-v...

 

Toshi

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors