- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HA for VLAN interfaces
Just a question about monitored interfaces under HA setting.
I know we can monitor physical interfces under HA setting but is it also possible to minitor VLAN interfaces?
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
While most everything is shared between HA members, I usually specify a dedicated management IP for each individual firewall. In total, I'll use at least three IP address, the shared IP between the HA members, and a unique IP on the MGMT interface for each firewall.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ZafirFX
Please follow the doc - https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-HA-Vlan-monitor-debug-commands/ta-p/...
https://docs.fortinet.com/document/fortigate/7.4.1/cli-reference/22620/config-system-ha-monitor
Best regards,
Erlin
If you have found a solution, please like and accept it to make it easily accessible to others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Doing a quick test on a lab, shows that you can not put vlan interface under monitoring interfaces tab.
Regards,
