Just a question about monitored interfaces under HA setting.
I know we can monitor physical interfces under HA setting but is it also possible to minitor VLAN interfaces?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
While most everything is shared between HA members, I usually specify a dedicated management IP for each individual firewall. In total, I'll use at least three IP address, the shared IP between the HA members, and a unique IP on the MGMT interface for each firewall.
Hi @ZafirFX
Please follow the doc - https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-HA-Vlan-monitor-debug-commands/ta-p/...
https://docs.fortinet.com/document/fortigate/7.4.1/cli-reference/22620/config-system-ha-monitor
Best regards,
Erlin
If you have found a solution, please like and accept it to make it easily accessible to others.
Doing a quick test on a lab, shows that you can not put vlan interface under monitoring interfaces tab.
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1733 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.