Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
OtmaneElouadoudi
New Contributor

HA cluster show licenses

Hi guys,

I have two fortigate in HA cluster, how can show the two devices license expiration date.

3 REPLIES 3
AEK
Honored Contributor II

Hi

From dashboard check the license expiration date.

Then execute a fail-over to the secondary node and check the same.

Or you can check from your support portal.

AEK
AEK
Toshi_Esumi
Esteemed Contributor III

Showing licenses at the FGT themselves is just reflection of what is registered at FTGD&Assets page of the support site. They might be delayed when you update/renew licenses. I would recommend checking the support site, asset page, for each unit first. In case you added/updated with new licenses, then, check them at the units.
If you have a "dedicated-to managment" interfaces, you don't have to swap the cluster to get to the GUI on the secondary unit. I recommend adding it too if you don't have it yet.

 

Toshi

hbac
Staff
Staff

Hi @OtmaneElouadoudi,

 

You can configure HA reserved management interface. This way, you will be able to access both HA units and check the license. Please refer to https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/1901...

 

Regards, 

Labels
Top Kudoed Authors