Hi All,
Running an active passive Fortigate cluster and OS 5.4.8 - -we need to have remote link failover working so that if a ping target cannot be reached x times then the cluster fails over. We cannot make any sense of the results, when the ping target fails the cluster takes several minutes to failover and this has no relation to our timers. Has any one else seen strange results like this? Is anyone else running it with good predictable and reliable results? If so in which firmware version. The config for HA and link-monitor is below:
config system ha
set group-name "xxxxxxx"
set mode a-p
set password ENC xxxxxxx
set hbdev "port1" 100 "port2" 50
set ha-mgmt-status enable
set ha-mgmt-interface "mgmt1"
set ha-mgmt-interface-gateway 10.200.254.250
set override enable
set priority 200
set monitor "port16" "port40"
set pingserver-monitor-interface "port20"
set pingserver-failover-threshold 5
config system link-monitor
edit "HA_Ping_Failover"
set srcintf "port20"
set server "10.10.10.1"
set interval 3
set timeout 3
set failtime 3
set recoverytime 3
set ha-priority 10
Any feedback appreciated.
Thanks, Moby.
