- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HA Wan speeds are slow
Hello , i have setup 2 FGT 200's in HA mode , active/standby
our wan 1 connection is 200 Mbps download
When i run a speed test i am only getting about half. AKA 100 Mbps download
i have the WAN connection and the 2 FGT WAN ports connected to a Cisco switch with the 3 switch-ports in isolated vlan .
did i miss anything? Does that sound like the correct configuration?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, do you have some UTM Feature on your policy ( App Control, AV, IPS ..... )
What's your hardware? A 200B, 200D, 200E ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For testing purpose can you try to disable all this feature on the policy (or create a new one only fromyour computer ip) and do a speed test again? Normally the lowest throuput of your device should be 820 Mbps but datasheet and real life are not the same.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Does you WAN connection connected to a 1GB port or 100MB port? Do you have some UTM features on your firewall policy?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
its a 2.5 GB port actually .
CAT 9300
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, do you have some UTM Feature on your policy ( App Control, AV, IPS ..... )
What's your hardware? A 200B, 200D, 200E ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
201E
yes
web,app, AV,DNS,SSL(certificate-inspection) all defaults.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For testing purpose can you try to disable all this feature on the policy (or create a new one only fromyour computer ip) and do a speed test again? Normally the lowest throuput of your device should be 820 Mbps but datasheet and real life are not the same.