Hi, im trying to setup a HA cluster between 2 1000D's running 5.6.5.
each FW is in a seperate data centre and has a dedicated heartbeat connection - and that bit works fine, what im struglling with is the MGMT interfaces when i join up the cluster.
data center 1 has a management network of 172.1.1.0 /24 and data center 2 uses 172.1.2.0/24
i have tried using MGMT1 in site 1 and MGMT2 in site 2 but that doesnt work.
how do i get HA setup but have MGMT access to both devices on their respective MGMT IP's?
thanks in advance.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
When you configure HA you can dedicate an interface as a management interface (in the HA settings page). Enabling this will ensure that interface IP address does not get sync'd between devices. So you could enable MGT1 as a management interface for both devices then configure each one's IP address individually.
neonbit wrote:as in the "management interface reservation" ? i dont see the mgmt interfaces listed in there :(When you configure HA you can dedicate an interface as a management interface (in the HA settings page). Enabling this will ensure that interface IP address does not get sync'd between devices. So you could enable MGT1 as a management interface for both devices then configure each one's IP address individually.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1632 | |
1063 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.