HI
is it possible to do an HA failover with the link-monitor on a Virtual-Switch which is connected to our LOCAL LAN?
So i have configured link-monitor for outside and inside.
WAN
config system link-monitor edit "gwdetect-upg-5" set srcintf "port7" set server "10.250.35.163" set source-ip 10.250.35.166 set interval 3 set timeout 3 set recoverytime 1 next
LAN
edit "gwdetect-1" set srcintf "Trust-SW" set server "172.20.218.6" set source-ip 172.20.218.9 set interval 3 set timeout 3 set recoverytime 1 set ha-priority 5 next end
HA config
config system ha set group-id 166 set group-name "MYCluster" set mode a-p set password ENC
set hbdev "ha1" 200 "ha2" 100 set route-ttl 180 set route-wait 10 set encryption enable set session-pickup enable set session-pickup-connectionless enable set override disable set priority 100 set monitor "port7" set pingserver-monitor-interface "port7" set pingserver-failover-threshold 5 set pingserver-flip-timeout 120 end
Problem i think is that i cannot specify the Trust-SW "Switch Interface" in the set ping-server-monitor-interface *
Is there really no possibility to do that?
I know that you cant specify a virtual-switch interface in the set monitor because of the design but i thought at least we could do it over the link-monitor ha stuff.
Thx guys.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1679 | |
1085 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.