Guide for SD-WAN VPN to Azure

[kansaa]

Hello, does anyone have a guide to setup IPSEC tunnels to Azure while using SD-WAN?

I had my tunnel to Azure working fine. Added a 2nd backup internet line and switched over to SD-WAN and now I can't get it to connect properly. I can get traffic from Azure to my site but not from my site to Azure.

[dbhavsar]

Hello @kansaa ,

you can see this doc which can help you creating tunnel with SDWAN:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configure-IPsec-VPN-with-SD-WAN/ta-p/20984...

[patelr]

Hello @kansaa,

Please review https://docs.fortinet.com/document/fortigate/6.2.16/cookbook/255100/ipsec-vpn-to-azure-with-virtual-... for further clarification.

Thanks, 
Ronak Patel

[hbac]

Hi @kansaa,

I assume you have 2 tunnels to Azure. Are both tunnels up? Please refer to this article to collect debug flow and packet capture of non-working traffic and share the output if possible: https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connecti...

Regards,