I have a Fortigate 50E set up as follows -
WAN 1 - 8MB
WAN 2 - 4MB
Internet Access routed to SD-WAN
1. How can I set up a scenario where 3MB of WAN 1 is always available to a group of IP Addresses or MAC Addresses within
the LAN ?
2. The Balance of 5Mb from WAN 1 and 4 MB should be made available to other IP Addresses on 2 levels of Priority
Level 1 - Group has priority to 5MB + 4MB
Level 2 - lower level of Access to 9MB
Right now the Fortinet training modules are free, so I'm going to say you should go watch this rather than have me try to explain it to you.
You want to go to the SD-WAN Self-Paced course here https://training.fortinet.com/course/view.php?id=4125
And choose module 4 regarding traffic shaping. It does a really good job explaining how it works and what the different options do.
Make a Internet policy for this ip group that comes before all other internet policies. Then add a traffic shaper to that policy and set it accoardingly. Might be needed for both directions.
Maybe (never triedit) this can also be achieved with some sd-wan rule(s)...
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.