Hi,
I' m not really familiar with the Fortigate, just trying to do everything by using the docs provided. I have some concerns/questions when doing the Fortigate 100A general settings setup.
Scenario: We have a Cisco pix firewall that needs to be replaced by the Fortigate100A. I have site2site vpn connections setup on the Cisco and all our staff uses vpn client Cisco to connect remotely to the office.
I' m really in the beginning of all these setup/configurations:
I would really appreciate it if someone could advise in the following:
Default Gateway --> This is the IP of my currenct Cisco Pix, right?
Primary DNS Server --> Our DC is our DNS server, so I would need to specify the IP of our DC here, right?
Secondary DNS Server --> we don' t have that, I can leave that blank, right?
NAT/Route Mode settings:
I don' t really understand what IP' s and netmasks I need to place for the " Internal Interface" and " WAN1"
Can anyone explain to me how this is setup and what IP' s are required?
When does one need " WAN2" ? and What IP do I need to specify here?
We will not be using DMZ, can I leave these blank?
As you can see, I have very little knowledge on this.... I just graduated....so this is my first practical encounter
I would really appreciate it if someone could advise me on this.
Thanks!!!
SOEN