Garceful Start\Stop Load Balance CLI command

[leoiaco]

Hi all,

anyone knows CLI command to graceful Start\Stop Load Balance Server like shown in attached image?

any help would be appreciated.

Regards. Leo

[pcraponi]

There's no "execute" command to do this... When you click on this action, FortiOS edit your load balance and set the 'status' to 'active' or 'disable':

config firewall vip edit "vip_LoadBalance-Test" config realservers edit 2 set status disable end end

Regards,

Paulo Raponi

[vjoshi_FTNT]

Hello,

I don't think there is any command for this. Neither the 'execute' nor the 'diag test application'.

May I know the firmware version currently running on the device?

[leoiaco]

Hi,

like you suggest in your previously answer, could you write Garceful Start\Stop Load Balance CLI command for this kind of configuration? (my config shown below):

edit "NLB-TEST_HTTPS" set uuid 01vvv30c-311d-51e5-f8ad-53270fa88375 set comment "Test NLB (443)" set type server-load-balance set extip 1.2.1.1 set extintf "port1" set server-type https set http-ip-header enable set monitor "LB_HealthCheck_Port_443_Monitor" "LB_HealthCheck_Ping" set persistence http-cookie set extport 443     config realservers        edit 1          set ip 192.168.0.70          set port 443        next        edit 2              set ip 192.168.0.71              set port 443            next         end set ssl-mode full set ssl-certificate "WILDCARD" next

Thanks in advance.

Regards

[leoiaco]

Hi,

thanks for your answer.

FortiOS version 5.2.2

Regards

[leoiaco]

Hi,

anyone can help me?

Thanks.

L.

[leoiaco]

Hi, like you suggest in your previously answer, could you write Garceful Start\Stop Load Balance CLI command for this kind of configuration? (my config shown below):   edit "NLB-TEST_HTTPS" set uuid 01vvv30c-311d-51e5-f8ad-53270fa88375 set comment "Test NLB (443)" set type server-load-balance set extip 1.2.1.1 set extintf "port1" set server-type https set http-ip-header enable set monitor "LB_HealthCheck_Port_443_Monitor" "LB_HealthCheck_Ping" set persistence http-cookie set extport 443     config realservers        edit 1          set ip 192.168.0.70          set port 443        next        edit 2              set ip 192.168.0.71              set port 443            next         end set ssl-mode full set ssl-certificate "WILDCARD" next   Thanks in advance. Regards