GUI Problems Moving Policies

rwdorman · ‎12-18-2014

I"m on 5.2.2 and I"m seeing odd behavior in the GUI. I cannot drag policies in different orders it says "changes saved" but when I move off the page and come back they are right where they started at the end of the policy list. Copying and Pasteing doesn't work either. In fact when I Cut a policy it disappeared into the ether not able to be pasted. I've tried in IE and Chrome. Wondering if anyone else has had a similar issue

-rd 2x 200D Clusters 1x 100D

1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D

Dave_Hall · ‎12-18-2014

Just curious to know if this is happening on the 200D Cluster or the single 100D? Have you tried making changes on both?

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

rwdorman · ‎12-19-2014

Good point... no it is not happening on the standalone 200D.

-rd 2x 200D Clusters 1x 100D

1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D

Dave_Hall · ‎12-19-2014

Ryan Dorman wrote:
Good point... no it is not happening on the standalone 200D.

Was kinda wondering if it was a weird syncing issue.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

Antonis · ‎02-09-2015

I have seen this issue also on two different 1500D clusters running 5.2.2.

I can move the policies around with command line only.