Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
rwdorman
New Contributor III

GUI Problems Moving Policies

I"m on 5.2.2 and I"m seeing odd behavior in the GUI.  I cannot drag policies in different orders it says "changes saved" but when I move off the page and come back they are right where they started at the end of the policy list.  Copying and Pasteing doesn't work either.  In fact when I Cut a policy it disappeared into the ether not able to be pasted.  I've tried in IE and Chrome.  Wondering if anyone else has had a similar issue

-rd 2x 200D Clusters 1x 100D

1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D

-rd 2x 200D Clusters 1x 100D 1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D
4 REPLIES 4
Dave_Hall
Honored Contributor

Just curious to know if this is happening on the 200D Cluster or the single 100D?  Have you tried making changes on both? 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
rwdorman
New Contributor III

Good point... no it is not happening on the standalone 200D.

-rd 2x 200D Clusters 1x 100D

1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D

-rd 2x 200D Clusters 1x 100D 1x 60D FortiOS 5.2 FortiAP 221C FAZ 200D
Dave_Hall
Honored Contributor

Ryan Dorman wrote:

Good point... no it is not happening on the standalone 200D.

Was kinda wondering if it was a weird syncing issue. 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Antonis
New Contributor

I have seen this issue also on two different 1500D clusters running 5.2.2.

 

I can move the policies around with command line only.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors