GUI IPV4 Policy & Objects > IPv4 Policy not showing in WEB GUI

[fabrice]

Hi all,

I've got a problem on a cluster Fortinet 500E  v5.6.5 build1600 (GA)

Web page Policy & Objects> IPV4 Policy wont show. 

I've got less than 400 Policy…

I can access in CLI. Not in GUI.

I've kill HTTPS process. Nothing better after. 

Reload both FW.

Test with differents Browsers. Opera, Chrome, Firefox.

Any help…

Best Regards,

Fabrice

[Toshi_Esumi]

Likely a new GUI bug. There were similar issues before with 5.4 like interface view keeps "circling". When it happens only thing we can do is to wait for a bug fix version. Please open a case with TAC. Probably somebody already reported the same problem though.

[globic]

Hi Fabrice,

I have the same problem here with the Fortigate 500E (image version 5.6.6). I have tried to update the image to 5.6.7 und rebooted the Fortigate, but noting better. Could you please tell me, how did you fixed your problem?

many thanks!

[Riccardo_Baiocchi]

Hi,

We had the same problem but in our case it was tied to a flag under a certain ADMIN PROFILE Edit Administration Profile "Name" Secure profile configuration flag on Web Filter in Read-Write that was the only one in "None" under that menu.

Best Regards.

[vrowell]

I have the same issue 5.6

[ishan_senevirathne]

Try the following debug commands 

diag debug enable diag debug app httpd -1

If the output is as follows

Can't open certificate file /tmp/admin_server.crt, nor /ssl/certs//tmp/admin_server.crt

Enter the below commands to assign the certificate 

config sys globalset admin-server-cert self-signend