Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
FG30E doesn't have DMZ port so you must have split the lan hard-switch to have the DMZ interface. Since you seem to have broken DHCP server config, you need to use a static IP within the subnet on the laptop, then try all ports one by one. But getting into it via console with CLI would be much easier if you're willing to learn CLI.
First, you need to find out how those lan ports are split to make the "DMZ". Is that lan4 port or other port?
It's under "config sys virtual-switch". "show" would show all ports in hard switch "lan". If it's separated you wouldn't see the port.
Then check what IP is configured on the port under "config sys int". Again "show" would show all config on all ports.
And then finally, find the IP configured as a gateway under "config sys dhcp server". Those are grouped with "edit 1", "edit 2", and so on. You probably broke the section serving the port subnet.
You should just search on the internet like "fortigate cli dhcp server configuration" then you can find a bunch of articles mostly inside of Fortinet's document library, which you can learn how DHCP server should be configured.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.