GPON OLT SFP module in Fortigate 100F firewall

[Charlez79]

Hi,

Is it possible to use a GPON OLT SFP module in a 100F?

Sould this work?

I would like to connect my fiber wan connection directly to the firewall.

I don't find any information about this. Someone that has this setup?

Specs of the module below.

GPON OLT SFP 1490nm-TX/1310nm-RX 2.5G-TX/1.25G-RX Class B+ 20km

DDM SC SMF Transceiver Modules

thx

[Anthony_E]

Hello Charlez79,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello,

We are still looking for someone to help you.

We will come back to you ASAP.

Regards,

[Anthony_E]

Hello,

I found this document which list the adapted for our products:

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Transceivers.pdf

Concerning yours, I cannot tell and I will leave this discussion open if someone has the same setup.

Regards,

[Charlez79]

Hi,

I was aware of that list, but indeed not helping me.

br

[SergeiVolkov]

Hi,
I faced the same issue. My ISP has SC/APC connector, but I didn't find SFP transceiver for SC interfaces. 

Did you solve your task?

[ITmized]

This could help you.

https://github.com/Anime4000/RTL960x

check ODI DFP-34X-2C2, keep in mind it will only work on 1Gbps, Fortigate will not support on 2,5Gbps. SFP port will only 1do Gbps and 10Gbps