Hi, perhaps someone can help me.
i have an 40c with latest firmware. i create the devices i need. put them into a group. then i created a ipv4 roule for this devices to access the internet.
i have connected an external access point to the internal ports of the 40c.
when i connect to this wifi, i get no ip adress from fritz box dhcp.....
i think i forgot something big....
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Questions:
1. Is the AP just an AP or is it a wireless router you are using as an AP? You need this AP to function as only an AP so that it will allow comm to go up to the Gate. You also need to make sure it isn't doing any vlan tagging or anything.
2. Do you have a DHCP server enabled on the internal interface that the AP is connecting to?
Mike Pruett
1. it is a wireless router i am using as acces point. this router is my internet connection on wan1.
2. the dhcp is not enabled in fortigate.only in the AP
i solved it with creating a rule for wan1 > internet for DHCP protocol. now it works.
but now i have to forward a port, that i can reach a device from external. is this possible with the 40c in transparent mode ? the port forward is allready configured in my router (fritz box).
can anyone help me ? i think port forward is not possible on transparent mode. is this true ?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1690 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.