Hi,
I have a 80c runing 5.2.10 with 3 vdoms(2 NAT & 1 transp) and I enabled log to memory to solve a problem on my network, but when I go to forward traffic I can only see a limited number of entries, it keeps showing around 150, sometimes 149 or 151 as I refresh the page.
I couldn't find any information on the internet regarding memory log quota about entries, please if someone can help
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
Basically logging to memory is limited on this device and when the quota is full it will replaces the old logs with the new ones.
Check the following document (page 25):
http://docs.fortinet.com/uploaded/files/2180/fortigate-loggingreporting-52.pdf
So if you enabled logging for traffic/web filter/application control ...etc, this will fill up the memory quickly and old logs will be replaced in few seconds.
The best is to use either FortiCloud or FortiAnalyzer.
Also you can send logs to Syslog server. CLI configuration:
config log syslog setting
set status enable
set ?
Notes:
1) Memory logging quota is not configurable on this device
2) Disk logging is available on FGT100D and larger
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1710 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.