Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 10-22-2006 09:58 AM
Regards, Paulo Raponi
it is a known issue when you have a special character as " &" in the address name or address group nameRemark: I have no special characters in any address name or group name at all~ => After the firmware upgrade, if you do found that when editing or creating a new policy... all of the addresses on the interface are gone, then don' t worry! All you need to do is just change the individual address name from any interface to the interface it should be!! Say, if you created an address name " Internal_ALL" , then just change the interface field from *any* to *internal*, after that, you could found your box become NORMAL~
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.