Found issues in v3mr3 (b400)

[wcbenyip]

It would be great to post any issues found in the latest firmware after testing.....

---

Just upgraded my fg60 from v3mr1 to v3mr3(b400) and found something wrong... 1/ In the existing fw policy or add a new fw policy, NO ADDRESS could be found in the source or destination address name.... 2/ Comparing with the memory allocated before firmware upgrade, the memory usuage is increased around 30% !!! (Before firmware upgrade, the memory usage in office hour is around 65%, and that in non-office hour is around 35%, but now in the non-office hour, it becomes 75%~)

[Prometejas]

I found that disappeared information about HDD status in main GUI page. Support said that it is only in CLI .

[willmays]

You should perform pre & post-upgrade testing on anything you do - firmware updates, rule modifications, enabling features, etc. That' s how you determine if the change worked, and if you need to act on your rollback plan. So yes it probably is a bit more work, but will save rushing around with problems when you thought everything was ok!

[wcbenyip]

Found one more good point, but dunno whether it' s new with MR3: Now we can just back the config of the box, and then modify it with a text editor; even restore the modified config file, the box is NO MORE NEED to reboot for taking the updated effect~ This is good for urgent maintenance and doing some modification without an interruption~