Hello,
i have a Fortigate 500 with FortiOS 5.4.6 in use.
We have a messenger names lanegram, which uses broadcast to communicate with other pcs. Now we have a new subnet, where pc's at. Now we have to enable broadcast forwarding. Is that advisable? What are pros and cons?
And how do I implement this? Only with a policy?
Thanks for any advise.
Kind regards
Tobias
Hi Tobias,
Did you define the new subnet in firewall object>addresses? If you have already define it than it should work (provided you have selected source and destination address>all). If you haven't define it, go to addresses and define and re-visit your policy to include it in source and destination addresses.
Regards,
Not correct, 1st broadcast are typically ttl=1 so they are never forward or routed. Next you will not find a broadcast subnet in the routing table.
OP, can the messenger service use "multicast" as an alternative? If so, that multicast route.
PCNSE
NSE
StrongSwan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1740 | |
1108 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.